AUTONET TV

Not So Hot in Willoughby

When the weather turns cold, it's nice to crank up the furnace and enjoy the heat. But if your home's furnace doesn't work, it's not too comfortable. Same goes with your vehicle. When the heater's not working, things can get miserable. It could also signal some major problems, which we'll discuss later.

A vehicle's heating system is fairly complicated. It's made up of several parts, including a blower motor/fan, a heater core and some mechanical and electrical components. In basic terms, a vehicle's engine warms up coolant which is then sent to the heater core (which is kind of like a small radiator) behind the dash. That blower motor sends cold air through the heater core which heats up the air. Voila! Heat.

Diagnosing problems in this system takes a trained mechanic because of the different possible issues. Your heater core may need replacing; they are sometimes in tight spots and may be difficult to work on. Another possible problem could be a defective thermostat, which regulates how the coolant flows through the engine. You may have a leak somewhere in your cooling system. Those leaks may be something as simple as a detached hose clamp or as serious as a bad head gasket. A knowledgeable technician at Lakeside Certified Auto will be able to track the problems down.

For those reasons, it's wise to get your vehicle's heating system repaired. Not only can driving an unheated vehicle on a cold day freeze your fingers, some related engine problems that are not repaired could leave you stranded.

Smart drivers keep up the maintenance on their vehicle's cooling system; it's a hot tip to prevent a cold vehicle.

Lakeside Certified Auto
38525 Lakeshore Blvd
Willoughby, OH 44094
(440) 946-0076
http://www.lakesidecertifiedauto.com

Lakeside Certified Auto Advice on What to Pour into Your Vehicle

Changes in vehicle design and manufacture have resulted in changed fluid requirements for our vehicles. With the sophistication of engines, transmissions, differentials, etc., it's best for Willoughby residents to always use the proper type of fluid for their vehicle. Using incorrect fluids can actually damage your engine.

As engines have become more sophisticated, new weights (or grades) of engine oil have been introduced. Today, there is a much wider range of weights for engine oil as well as a variety of formulations for different types of engines.

Transmission fluid, brake fluid and coolant/anti-freeze have changed because the materials that go into making the systems they protect have changed. The fluids in our vehicles generally have two jobs: to lubricate and to prevent corrosion. The fluids formulated for your vehicle are specifically designed to protect the materials that make up its engine parts. Using the wrong fluid may leave some parts vulnerable to corrosion. Further, using the wrong fluids can also void your vehicle's warranty. So Lakeside Certified Auto recommends Willoughby drivers follow the fluid recommendations in their owner's manuals.

Vehicle fluids, including engine oil, are also designed in special formulas for higher mileage vehicles. These formulas contain additives that help clean older engines and transmissions as well as recondition older seals and gaskets. These fluids are perfectly okay for your vehicle as long as you match the original fluid recommendations in your owner's manual. In other words, a high-mileage oil is fine as long as it is the same weight as the oil recommended by your vehicle's manufacturer.

Good vehicle care always includes proper attention to your vehicle's fluids. Understanding and using correct fluids will keep your vehicle running well and will help prevent early corrosion and wear of vital engine parts.

Talk to your Lakeside Certified Auto service advisor for more information.

Lakeside Certified Auto
38525 Lakeshore Blvd
Willoughby, OH 44094
(440) 946-0076
http://www.lakesidecertifiedauto.com