AUTONET TV

Water Everywhere (Clogged Drains)

It's bad enough when you mistakenly leave a window open in your vehicle on a rainy day and you find your carpet soaked.  But what in the world is going on when your windows are closed tight, not leaking and you STILL wind up with wet carpet? The answer could be something you might not even know your vehicle has.

And the answer is? Drains. And those drains can get clogged.  Yes, your vehicle has several drains with tubes or hoses attached to them that you really never see.  There are some in and around the hood that channel rainwater down to the ground.  There are some that take condensation from the air conditioner and allow it to flow outside.  And if your vehicle has a retractable sunroof or moon roof, there are small drains at each corner that connect to tubes that go through the vehicle body down to an exit near the ground. 

Considering all the leaves, dirt, dust and other debris your vehicle encounters on a daily basis, it's not surprising that these drains can get blocked.  Then when it rains, that water winds up going to the place of least resistance.  Sometimes, that's inside the cabin where it shows up as wet carpeting.

So, what's the solution?  You may be tempted to see if you can clean out those drains yourself.  But there are many people who have tried blowing condensed air in the drains only to find that they literally blow the tubes off of their connections inside the vehicle's body.  Reattaching those can be a time-consuming, labor-intensive, expensive proposition.

A trained technician has the equipment and knowledge to clear out those drains properly. To prevent clogged drains, regular maintenance is the key, so when your vehicle is in for other periodic maintenance like oil changes and tire rotations, the technician can make sure all drains are clear and flowing like they should.

Lakeside Certified Auto
38525 Lakeshore Blvd
Willoughby, OH 44094
(440) 946-0076
http://www.lakesidecertifiedauto.com

The Key Won't Turn! (Ignition Problems)

You've just arrived at the store shopping and you're ready to head home.  You put your key in the ignition and… oh, no! The ignition won't turn! What do you do now?

Don't panic.  There are some things you can do to get going again.  The first thing to do is see if you have a locking steering wheel, an anti-theft feature that was introduced around 1970.  Sometimes it sticks.  Move the steering wheel side to side while you try to turn the key and you might be able to get it to release. 

Another thing to check is to see if your vehicle is in gear.  Most vehicles will only allow you to start the ignition if it's in park or neutral.  If you have an automatic transmission vehicle and it is in park, try jiggling the shift lever and try the key again.  Sometimes the safety mechanism doesn't properly make contact or gets a little sloppy. 

If both of these don't work, it could be your vehicle's battery is dead.  Some newer electronic systems require power so the key can turn. Others have alarm systems that detect if doors are open. 

Other issues that can cause key problems include something jammed in the lock cylinder.  Or some of the springs or pins inside may be stuck.  Consider that it may be the key itself.  Sometimes they get bent or simply wear out from the number of times they've been put in and taken out of the cylinder.

No matter what the cause, the first time this happens you should have your repair service facility check it out. That’s because if it happens once, it can happen again.  Even if you were able to get going again on your own, your ignition/key has warned you that something's wrong.  Have it checked out by a pro so you’re not locked into a bad situation.

Lakeside Certified Auto
38525 Lakeshore Blvd
Willoughby, OH 44094
(440) 946-0076
http://www.lakesidecertifiedauto.com